This is Gentoo's testing wiki. It is a non-operational environment and its textual content is outdated.
Please visit our production wiki at https://wiki.gentoo.org
Manual de Gentoo: HPPA/Instalación/Arranque
Installing PALO
On the PA-RISC platform, the boot loader is called palo. First merge this bootloader to the system:
root #emerge --ask sys-boot/paloThe configuration file will be found at /etc/palo.conf. Below is a sample configuration:
/etc/palo.confSimple PALO configuration example--commandline=2/kernel-3.16.5-gentoo root=/dev/sda4 --recoverykernel=/vmlinux.old --init-partitioned=/dev/sda
The first line tells palo the location of the kernel and which boot parameters it must use. The string 2/kernel-3.16.5-gentoo means the kernel named /kernel-3.16.5-gentoo resides on the second partition. Beware, the path to the kernel is relative to the boot partition, not to the root partition.
The second line indicates which recovery kernel to use. If it is the first install and there is no recovery kernel (yet), please comment this out. The third line indicates on which disk palo will reside.
When configuration is done, simply run the palo command:
root #palo
Reiniciar el sistema
Salga del entorno chroot y desmonte todas las particiones que continúen montadas. Luego escriba la orden mágica da inicio a la auténtica prueba final: reboot.
root #exitcdimage ~#cd
cdimage ~#umount -l /mnt/gentoo/dev{/shm,/pts,}
cdimage ~#umount -R /mnt/gentoo
cdimage ~#rebootPor supuesto, no olvide quitar el CD arrancable, o podría arrancar de nuevo el CD en lugar de su nuevo sistema Gentoo.
Una haya reiniciado en su recien instalado entorno Gentoo, termine con Finalizar la instalación de Gentoo.