This is Gentoo's testing wiki. It is a non-operational environment and its textual content is outdated.
Please visit our production wiki at https://wiki.gentoo.org
Talk:Raspberry Pi/Minimal musl+busybox cross building
From Gentoo Wiki (test)
Jump to:navigation
Jump to:search
Note
This is a talk page. Please add newer comments below older ones, and sign your comments using four tildes (
This is a talk page. Please add newer comments below older ones, and sign your comments using four tildes (
~~~~).
When adding a new section (at the bottom of the page), please mark it as "open for discussion" by using {{talk|open}} so it will show up in the list of open discussions.About the process
Talk status
This discussion is still ongoing.
The Hardened project does not provide a stage3 based on musl for the Raspberry Pi 1 but you may be interested by the method used to create stage3 for armv7a boards. The installation exposed in the article looks like Cross Linux From Scratch embedded!
--Feng (talk) 13:10, 29 December 2017 (UTC)
Issues faced during the process as of 2018/11/02
Talk status
This discussion is still ongoing.
sysroot should be given same as root in
root #armv6j-hardfloat-linux-musleabi-emerge --root=/usr/armv6j-hardfloat-linux-musleabi/usr/src/squashfs --config-root=/usr/armv6j-hardfloat-linux-musleabi -Kav `cat /root/armv6j-world`