This is Gentoo's testing wiki. It is a non-operational environment and its textual content is outdated.

Please visit our production wiki at https://wiki.gentoo.org

Fontconfig

From Gentoo Wiki (test)
Jump to:navigation Jump to:search
Resources

The fontconfig library (media-libs/fontconfig) is intended to provide uniform font selection and configuration amongst all GUI applications. Although it is common for a desktop environment to provide its own font overrides and configuration utilities, fontconfig is still the underlying library.

Installing

When fontconfig is needed, it will almost certainly be installed already. If not, make sure to set up the graphical subsystem (i.e., X or Wayland) and desktop environment properly.

USE flags

fontconfig doesn't know many USE flags.

USE flags for media-libs/fontconfig A library for configuring and customizing font access

doc Add extra documentation (API, Javadoc, etc). It is recommended to enable per package instead of globally
nls Add Native Language Support (using gettext - GNU locale utilities)
test Enable dependencies and/or preparations necessary to run tests (usually controlled by FEATURES=test but can be toggled independently)

Configuration

Note
Changes to fontconfig files will reflect only in applications started after the change!

Generic

fontconfig uses XML files in the /etc/fonts/ directory to generate its internal configuration. By default it parses /etc/fonts/fonts.conf (users should not edit this file!) which sets some sane defaults and usually contains code to also parse /etc/fonts/conf.d/ content. In addition there is the /etc/fonts/conf.avail/ directory that contains various possible configuration files that each cover some aspect of fontconfig. It's customary to symlink necessary files to /etc/fonts/conf.d/. These files are executed in order they are named; for this reason their names start with a two digit number with the first digit (tens) indicating what the file affects (called the class).

Gentoo specific

Gentoo ships an eselect module (eselect fontconfig) that does exactly what was described in generic way - it manages symlinks of files in /etc/fonts/conf.avail/ by adding or removing them from the /etc/fonts/conf.d/ directory. For obvious reasons changing system wide configuration requires appropriate permissions.

The following subsections explain how to deal with the fontconfig eselect module.

Listing available files

The list command shows the available fontconfig files, and marks the enabled ones with an asterisk (*).

root #eselect fontconfig list
Available fontconfig .conf files (* is enabled):
  [1]   10-autohint.conf *
  [2]   10-no-sub-pixel.conf
  [3]   10-sub-pixel-bgr.conf
  [4]   10-sub-pixel-rgb.conf
  [5]   10-sub-pixel-vbgr.conf
  [6]   10-sub-pixel-vrgb.conf
  [7]   10-unhinted.conf
  [8]   11-lcdfilter-default.conf
  [9]   11-lcdfilter-legacy.conf
  ...
Warning
Different systems have different files in fonts.avail so the output will be different. Never blindly use a list number from another source (such as blog posts or wiki articles).

Enabling a file

Files can be enabled either by filename or by the number in brackets. These two do the same thing:

root #eselect fontconfig enable 10-sub-pixel-rgb.conf
root #eselect fontconfig enable 4

Disabling a file

Files can be disabled likewise:

root #eselect fontconfig disable 10-sub-pixel-rgb.conf
root #eselect fontconfig disable 4

Custom system wide configuration

To create a custom, system-wide fontconfig file, enable 51-local.conf and create /etc/fonts/local.conf (this is an XML file).

FILE /etc/fonts/local.confExample file that sets preferred font fallback order for sans-serif font
<?xml version="1.0"?>
<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
<fontconfig>
  <alias>
    <family>sans-serif</family>
    <prefer>
      <family>Ubuntu</family>
      <family>TakaoPGothic</family>
      <family>Droid Sans</family>
    </prefer>
    <default><family>DejaVu Sans</family></default>
  </alias>
</fontconfig>

To be clear, this says that when it comes to sans-serif fonts, we prefer using Ubuntu, TakaoPGothic, and Droid Sans fonts (in that order) over DejaVu Sans (which can be used as a default choice only when necessary). Obviously, different choices can be made here.

Per-user configuration

To create per-user fontconfig files, enable 50-user.conf (which might be enabled by default), and have the end users use the ~/.config/fontconfig/fonts.conf file. This file has the same XML format as local.conf.

Note
This is one way how a desktop environment might try to affect font rendering. It might be prudent to disable this to be sure that what's being shown is actually system wide configuration when customizing it. Disabling it also makes font rendering more uniform across user accounts.
Note
The previously used ~/.fonts.conf is now deprecated in favor of the $XDG_CONFIG_HOME based location. This variable by defaults points to ~/.config.

Checking configuration

Check the default font replacement, for example for Arial, by typing:

user $fc-match Arial

Anti-aliasing, hinting, and sub-pixel rendering

Rendering aspects can be tuned as well. In the following sections the Anti-aliasing, Hinting and Sub-pixel rendering features are tuned.

Feature Description
Anti-aliasing is enabled by default and makes fonts less blocky.
Hinting is an attempt to cope with the low pixel count per unit of area of current displays. Correct hinting makes characters more crisp but since font metrics aren't changed (and arguably should not change) affects how overall the rendered text looks like.
Sub-pixel rendering uses the fact that LCD matrix has three primaries to effectively triple the resolution of text but can make characters appear not entirely black. To combat that lcdfilter is to be used with sub-pixel rendering (available for newer fontconfig) but it can blur the characters too much. In the end this entirely depends on person how they like their text.

Forcing hinting

The default fontconfig behavior regarding hinting is rather undocumented, but it can be made deterministically sub-optimal by making a system wide default.

  1. First enable /etc/fonts/local.conf
  2. Edit the local.conf file to include full hinting by default

This local.conf snippet enables full hinting:

FILE /etc/fonts/local.confSetting hinting to full
<match target="font">
  <edit mode="assign" name="hintstyle">
    <const>hintfull</const>
  </edit>
</match>
Note
Most fonts look best with full hinting but others need slight or more rarely some other other hinting option. Some fonts for one reason or another will always be ugly.

Using sub-pixel rendering

It's important to determine the sub-pixel layout of the LCD matrix. It's usually RGB (10-sub-pixel-rgb.conf) but the only way to be sure is to either consult display specification or use this sub-pixel layout test to determine it.

Once determined, enable the appropriate 10-sub-pixel-<matrix type>.conf file.

root #eselect fontconfig enable 10-sub-pixel-rgb.conf

It's strongly advised that lcdfilter, if available, is used with sub-pixel rendering. It comes in different varieties but the default (11-lcdfilter-default.conf) should be appropriate for all common fonts.

root #eselect fontconfig enable 11-lcdfilter-default.conf
Warning
The bindist USE flag in media-libs/freetype disables sub-pixel rendering altogether due to potential patenting issues. In order to use sub-pixel rendering, the USE flag must be disabled (i.e., -bindist) for this package.

Regarding autohinter

Autohinter attempts to do automatic hinting disregarding any existing hinting information. Until recently it was the default because TrueType2 was covered by patents but now that they have expired there's very little reason to use it. From technical point of view it does better than broken or no hinting information but it will be strongly sub-optimal for fonts with good hinting information. Generally system fonts are of the second kind so autohinter should not be used.

Warning
Autohinter is not compatible with sub-pixel rendering, do not use the two together!

Infinality

Infinality is a (somewhat controversial) set of patches for FreeType and accompanying fontconfig files. The goal of Infinality is to provide higher quality font rendering including emulation of other OS font rendering styles.

Note
As usual with software still in development it is prudent to always use only the latest version available unless there are known problems with it.

Enabling Infinality

Enable the 'infinality' USE flag by editing make.conf either manually or by using the euse tool.

root #euse -E infinality

Next, rebuild the affected programs.

root #emerge --ask -uvDU @world

Unless messages shown after rebuild tell otherwise, enable 52-infinality.conf.

root #eselect fontconfig enable 52-infinality.conf

Configuring Infinality

Infinality can be configured in various ways including custom configurations, but easiest is to use pre-made profiles shipped in media-libs/fontconfig-infinality that along with eselect modules should have been installed as dependencies of the infinality USE flag.

Quick and reasonable config

root #eselect infinality set infinality
root #eselect lcdfilter set infinality
Note
As always, fontconfig changes affect only applications started after changes have been made.

It's also recommended to disable all fontconfig settings except for 52-infinality.conf as they interfere with the rendering of infinality styles:

root #eselect fontconfig disable <number>

Certain fontconfig settings do not interfere with how the fonts are rendered, but rather determine the default fonts for font-types (such as Monospace, sans-serif, etc.). Such settings (for example the 62-croscore-*.conf configurations) can be left enabled.

Explanation

Infinality provides FreeType environment variables that can be used to configure features introduced with its patches as well as fontconfig files to be used with these changes. fontconfig file sets are administrated on Gentoo via eselect infinality while the FreeType behaviour is set using eselect lcdfilter.

These eselect modules function as usual:

  • Listing available fontconfig file sets.
root #eselect infinality list
  • Listing available FreeType variable sets.
root #eselect lcdfilter list
  • Both sets should match of course except when there are multiple matches possible such as shown below.
root #eselect infinality set win7
root #eselect lcdfilter set windows-7-light

Picking fonts

Choosing the right font can be trickier than deciding on the right hinting type. For one reason or another, some fonts will never be perfect — but it's certainly possible to make them look better than, say, the Windows 7 default font configuration.

Here are some recommendations regarding well known fonts in Gentoo:

Font family Pros Cons
Liberation
media-fonts/liberation-fonts
Red Hat's fonts, which are metric-compatible with MS TrueType corefonts, have a decent, modern look. This is the Gentoo Fonts team recommendation for default Latin fonts. Covers about 2,600 code points. Latin, Greek, Cyrillic, and Hebrew only. A few glyphs may have hinting trouble.
Linux Libertine
media-fonts/libertine
Very similar to Liberation, covering about 2,700 code points. Linux Libertine itself is proportional serif only, but the package contains less extensive sans and mono fonts, as well. Can be used as a fallback for some glyphs not in Liberation. Latin, Greek, Cyrillic, and Hebrew only. Sans and mono fonts are limited.
Noto
media-fonts/noto
Google's font family that aims to support all the world's languages (so, well over 60,000 code points). It goes well with Liberation or Droid. Adobe's Source Han Sans fonts are included for CJK. Recommended as a fallback for many glyphs not covered by Liberation. Big download.
DejaVu
media-fonts/dejavu
Many styles and covers a lot of code points (about 6,100 for sans). Exceptionally wide — even condensed is wider than same-height monospace. Overall second to Verdana (an MS font) in width. Sans-serif font is only average.
Droid
media-fonts/droid
Covers a lot of code points and scripts. Very dry, wide yet thin glyphs. Clearly designed with handheld devices and their small screens in mind.
Gentium Plus
media-fonts/sil-gentium
Fairly distinctive; might appeal to people who like narrow fonts. Serif only. As with other SIL fonts, the hinting is questionable.
Ubuntu
media-fonts/ubuntu-font-family
Used in Ubuntu (obviously). A distinctive font family with a style which might not appeal to everyone. Overall looks good and covers a fair number of code points. Only the sans-serif font is truly polished; narrow and monospaced versions are unfinished. No known serif font that would accompany it well.
URW
media-fonts/urw-fonts
Metric compatible with popular Adobe fonts (among others?). Seem to require slight hinting.
MS TrueType corefonts
media-fonts/corefonts
Includes most fonts used in documents and on the web. MS does not distribute them nowadays, so the available fonts are from many years ago and do not reflect their current state (not to mention the state of the art). Obviously, lacks fonts introduced more recently. Require full hinting.
Unifont
media-fonts/unifont
Covers a lot of code points. In addition to being ugly as sin, it also fails some basic requirements to be considered a typeface. Is it sans-serif? Is it serif? Please never use this.

External resources